Description
Highland 37 Bladder
Looking for a wing that is built like a battleship? The Highland by XS Scuba 37 lbs. (16.78 kg) Lift Wing Bladder is what you’re looking for! This 360 Degree full circle design wing is built-to-last with a 22-mil thick urethane inner bladder and a 1000D nylon Cordura with urethane lamination outer cover. The cover seams are sewn with #138 nylon bonded thread for strength and durability. The wing has three sets of 11″ (27.9cm) on-center grommets that are made from heavy nickel-plated brass. The cover is equipped with a YKK #5-Delrin zipper for access to bladder and the over-pressure valve (OPV) with pull-dump cord can be mount on the lower left or right, your choice.
Built to Last Budget Wing
The wing comes equipped with a center point mounted Highland by XS Scuba’s Inflator Assembly. The Highland by XS Scuba Inflator mechanism is a classic old school power inflator design which is also built-to-last. The inflator is equipped with a 1″ (2.5cm) diameter corrugated inflation hose, cable activated rapid exhaust pull dump top valve and a durable non-corrosive plastic body with chrome plated brass quick-disconnect (QD) bayonet fitting. A MiFlex 3/8″ threaded low-pressure quick-disconnect inflator hose comes standard with the wing and inflator. The Highland by XS Scuba Wing is black in color.
Warranty Information
This product has a limited warranty of 24 months.
866-977-2822
Highland by XS Scuba Wing Bladder 37 lbs. (16.78 kg) Lift Features
Highland by XS Scuba Wing Bladder:
37 lbs. (16.78 kg) Lift
360 degree Full Circle Design Wing
Built-Like-A-Battleship
Bladder: 22-mil Thick Urethane
Outer-Cover: 1000D Nylon Cordura w/Urethane Lamination
Cover Seams: #138 Nylon Bonded Thread for Strength & Durability
Three Sets of 11″ (27.9cm) On-Center Grommets
Grommets: Heavy Nickel-Plated Brass
Zipper
YKK #5-Delrin Zipper for Access to Bladder
Over-Pressure Valve (OPV) w/Pull-Dump Cord
OPV: Mount-On Lower Left or Right, Divers Choice!
Center Point Mounted Highland by XS Scuba’s Inflator Assembly
Inflator Mechanism: Classic Old School Power Inflator Design, Built-to-Last
1″ (2.5cm) Diameter Corrugated Inflation Hose
Durable Non-Corrosive Plastic Body
Chrome Plated Brass Quick-Disconnect (QD) Bayonet Fitting
MiFlex 3/8″ Threaded Low Pressure Quick Disconnect Inflator Hose
Color: Black
California residents please click here for Proposition 65 WARNING
